XTD-175KA Antenna-Mount TWTA, Ka-Band, 175W

 XTD-175KA Data Sheet  (1,567kb)

Available Options

• Linearizer
• Harmonic Filter (0.3 dB output power reduction)
• WR-34 Waveguide Output or Input
• Alternate Frequency Coverage
• Remote External Controller
• 1:1, 1:2, 1:N Redundancy
• Phase Combined

	Model No.	TWT / Flange Power, Watts	Weight, pounds
C-Band
	XTD-400C	400 / 350	55
	XTD-750C	750 / 650	75
X-Band
	XTD-150X	150 / 125
	XTD-400X	400 / 350	55
	XTD-550X	550 / 500	75
	XTD-750X	750 / 650	75
Ku-Band
	XTD-200K	200 / 175	34
	XTD-400K	400 / 350	52
	XTD-750K	750 / 650	75
	XTD-1250KL	1250 / 1120	95
	XTD-2500KL	2500 / 2200	200
DBS-Band
	XTD-50DBS	50 / 43	34
	XTD-270DBS	270 / 225	75
	XTD-500DBS	500 / 415	75
	XTD-750DBS	750 / 650	70
	XTD-750DBSL	750 / 400	70
Ka-Band
	XTD-150Ka	150 / 125	48
	XTD-175Ka	175 / 145	48
	XTD-250Ka	250 / 220	48
	XTD-250KaL	250 / 100	48
	XTD-500Ka	500 / (417/250)	58
Q-Band
	Please contact factory for information.
V-Band
	Please contact factory for information.
	Visit our TWTA Antenna-Mount with BUCs product page.
	Visit our TWTA Rack-Mount product page.
	Visit our TWTA Multi-Band product page.

The XTD-150Ka, XTD-175Ka, and XTD-250KaL series are compact self contained antenna mount power amplifiers designed for low cost installation and long life. Cooling and monitor & control systems are all self contained within the amplifier. By combining the power supply and the RF components within the same amplifier case, the need for external high voltage cables (required for split-box designs) is eliminated. These highly compact units typically weigh only 48 pounds. TWTs are available delivering 120 Watts to 250 Watts in the 26.5 to 31.0 GHz band. Alternative frequency coverage is available.

XTD-175KA Antenna-Mount TWTA, Ka-Band, 175W

This series of amplifiers provides several methods of tube protection. Due to Xicom’s unique power supply design, less than 1 joule is stored in the power supply. A high frequency resonant conversion power supply is used that accepts a wide range of prime power (100 to 260 VAC). The unit also features power factor correction circuitry that minimizes line current distortion and reduces the required volt-amps input.

These amplifiers have built-in waveguide switch control capability. This can be used in a 1:1 redundancy configuration. A single RS-485 cable can control two amplifiers and redundancy switch.

The amplifiers are available with multiple options including redundant and phase combined system configurations, integral linearizers and harmonic filters.

Remote external controllers are available to operate the HPA from a user selected location.