XTD-270DBS Antenna-Mount TWTA, DBS-Band, 270W

Available Options

  • Remote External Controller
  • Extended Frequency Range (17.3-18.4 GHz)
  • 1:1, 1:2, 1:N Redundancy
  • Variable Phase Combined
  • Integrated Linearizers
  • Block Upconverter

qlink twta antenna
  Model No. TWT / Flange Power, Watts Weight, pounds

C-Band

XTD-400C400 / 350 55 
XTD-750C750 / 650 75 

X-Band

XTD-150X150 / 125  
XTD-400X400 / 350 55 
XTD-550X550 / 500 75 
XTD-750X750 / 650 75 

Ku-Band

XTD-200K200 / 175 34 
XTD-400K400 / 350 52 
XTD-750K750 / 650 75 
XTD-1250KL1250 / 1120 95 
XTD-2500KL2500 / 2200 200 

DBS-Band

XTD-50DBS50 / 43 34 
XTD-270DBS270 / 225 55 
XTD-500DBS500 / 415 75 
XTD-750DBS750 / 650 70 
XTD-750DBSL750 / 400 70 

Ka-Band

XTD-150Ka150 / 125 48 
XTD-175Ka175 / 145 48 
XTD-250Ka250 / 220 48 
XTD-250KaL250 / 100 48 
XTD-500Ka500 / (417/250) 58 

Q-Band

Please contact factory for information.

V-Band

Please contact factory for information.
Visit our TWTA Antenna-Mount with BUCs product page.
Visit our TWTA Rack-Mount product page.
Visit our TWTA Multi-Band product page.

The XTD-270DBS is a compact self contained antenna mountable high power amplifier (HPA) designed for low cost installation and long life. The outdoor design eliminates the need for an amplifier shelter as well as a long waveguide run between the amplifier and the antenna feed horn. RF filters, cooling, and monitoring & control (M&C) systems are all self contained within the HPA. These features provide high reliability, low maintenance costs, and low replacement costs.

The XTD-270DBS uses high efficiency dual-stage collector Traveling Wave Tubes (TWT). Some benefits of this type of TWT are:

  • Reduced prime power consumption
  • Lower internal operating temperatures
  • Reliability enhancement

These benefits are obtained for both the linear and saturated modes of operation. The XTD-270DBS incorporates power factor correction circuitry which minimizes line current distortion and reduces the required volt-amps. The combination of power factor correction and high efficiency TWTs reduces input Volt-Amps by 45% when compared to equivalent amplifiers. A high frequency resonant conversion power supply is used that accepts a wide range of prime power (100 to 260 VAC).

XTD-270DBS Features

  • No Shelter Required
  • Short Waveguide Run
  • Power Factor Corrected
  • High Efficiency Dual-Stage TWTs
  • Complete RS-232/422/485 Interface

A complete serial M&C system is built into the unit. A remote external controller is available to operate the HPA from a user selected location.

Service and Support

Xicom is known worldwide for high quality and state-of-the-art designs of our high power indoor and outdoor amplifier products. All Xicom products are supported 24/7 from service centers worldwide.

For more information about Xicom Technology and our wide range of products, please contact us by E-Mail or call us at +1 408-213-3000 (USA), in the EU at +(44) 1753-549-999, or in the Far East at +(65) 6325-1953.

print  |   home  |   site map  |   privacy  |   contact
© 2010 Comtech Xicom Technology, Inc. All Rights Reserved.