XTD-750C Antenna-Mount TWTA, C-Band, 750W

 XTD-750C Data Sheet  (1,197kb)

Available Options

• Extended Frequency Coverage
• Integrated Linearizer
• Remote External Controller
• 1:1, 1:2, 1:N Redundancy
• Block Upconverter

	Model No.	TWT / Flange Power, Watts	Weight, pounds
C-Band
	XTD-400C	400 / 350	55
	XTD-750C	750 / 650	75
X-Band
	XTD-150X	150 / 125
	XTD-400X	400 / 350	55
	XTD-550X	550 / 500	75
	XTD-750X	750 / 650	75
Ku-Band
	XTD-200K	200 / 175	34
	XTD-400K	400 / 350	52
	XTD-750K	750 / 650	75
	XTD-1250KL	1250 / 1120	95
	XTD-2500KL	2500 / 2200	200
DBS-Band
	XTD-50DBS	50 / 43	34
	XTD-270DBS	270 / 225	75
	XTD-500DBS	500 / 415	75
	XTD-750DBS	750 / 650	70
	XTD-750DBSL	750 / 400	70
Ka-Band
	XTD-150Ka	150 / 125	48
	XTD-175Ka	175 / 145	48
	XTD-250Ka	250 / 220	48
	XTD-250KaL	250 / 100	48
	XTD-500Ka	500 / (417/250)	58
Q-Band
	Please contact factory for information.
V-Band
	Please contact factory for information.
	Visit our TWTA Antenna-Mount with BUCs product page.
	Visit our TWTA Rack-Mount product page.
	Visit our TWTA Multi-Band product page.

The XTD-750 is a compact, self-contained, antenna mountable power amplifier designed for low cost installation and long life. The XTD-750 design eliminates the need for an amplifier shelter as well as a long waveguide run between the amplifier and antenna feed horn. RF filters, cooling, and monitoring & control (M&C) systems are all self-contained within the High Power Amplifier (HPA). These features provide high reliability, low maintenance costs, and low replacement costs.

XTD-750C Antenna-Mount TWTA, C-Band, 750W

The XTD-750 uses high efficiency, dual-stage collector Traveling Wave Tubes (TWT). Some benefits of this type of tube are: reduced prime power consumption, lower internal operating temperatures, reliability enhancement.

The XTD-750 incorporates power factor correction circuitry, which minimizes line current distortion and reduces the required Volt-Amps. The combination of power factor correction and high efficiency TWTs reduces input Volt-Amps by 45% when compared to equivalent amplifiers. A high frequency resonant conversion power supply is used that accepts a wide range of prime power (180 to 260 VAC). The automatic features of the power supply include quick recovery from prime power outages and multiple helix arc fault resets (three fault cycles). A complete serial M&C system is built into the unit.

The XTD-750 may be configured for single thread, redundant, phase-combined, or linearized operation.