XTD-750DBS Antenna-Mount TWTA, DBS-Band, 750W

 XTD-750DBS Data Sheet  (1,283kb)

Available Options

• Extended Frequency Coverage
• Linearizer
• Parallel (Discrete) Interface
• Remote External Controller
• 1:1, 1:2, 1:N Redundancy
• Variable Phase Combined
• Ethernet
• Block Upconverter

	Model No.	TWT / Flange Power, Watts	Weight, pounds
C-Band
	XTD-400C	400 / 350	55
	XTD-750C	750 / 650	75
X-Band
	XTD-150X	150 / 125
	XTD-400X	400 / 350	55
	XTD-550X	550 / 500	75
	XTD-750X	750 / 650	75
Ku-Band
	XTD-200K	200 / 175	34
	XTD-400K	400 / 350	52
	XTD-750K	750 / 650	75
	XTD-1250KL	1250 / 1120	95
	XTD-2500KL	2500 / 2200	200
DBS-Band
	XTD-50DBS	50 / 43	34
	XTD-270DBS	270 / 225	75
	XTD-500DBS	500 / 415	75
	XTD-750DBS	750 / 650	70
	XTD-750DBSL	750 / 400	70
Ka-Band
	XTD-150Ka	150 / 125	48
	XTD-175Ka	175 / 145	48
	XTD-250Ka	250 / 220	48
	XTD-250KaL	250 / 100	48
	XTD-500Ka	500 / (417/250)	58
Q-Band
	Please contact factory for information.
V-Band
	Please contact factory for information.
	Visit our TWTA Antenna-Mount with BUCs product page.
	Visit our TWTA Rack-Mount product page.
	Visit our TWTA Multi-Band product page.

The XTD-750DBS1 is a compact self-contained, antenna mountable power amplifier designed for low cost installation and long life. The design eliminates the need for an amplifier shelter as well as a long waveguide run between the amplifier and the antenna feed horn. RF harmonic filters, cooling, and monitoring & control systems are all self-contained within the HPA. These features provide high reliability, low maintenance costs, and low replacement costs.

XTD-750DBS Antenna-Mount TWTA, DBS-Band, 750W

The amplifier incorporates a high efficiency multi-stage collector TWT. Some of the benefits are: reduced prime power consumption, lower internal operating temperatures, and reliability enhancement. These benefits are obtained for both the linear and saturated modes of operation.

The combination of power factor correction and high efficiency TWT reduces input Volt-Amps by 45% when compared to equivalent amplifiers. An optional linearizer is available to allow increased transmit power while meeting spectral regrowth requirements.

A complete serial monitoring and control system is built into the unit. The XTD-750DBS1 may be configured for single thread, redundant or phase-combined operation. It can be configured to control one or two switches.

A remote external controller is available to operate the HPA from user selected location. Mounting brackets can be supplied to mount the HPA to most popular antennas.